Immobiliser Bypass CDI fits Aprilia Habana Mojito Scarabeo SportCity 125 200

Description

New Aftermarket Immobilizer Bypass CDI Unit
To replace original Aprilia / Derbi CDI Units on 125cc, 180cc and 200cc LEADER engine Scooters.
Removes immobilizer, replaces factory CDI. You will no longer require a chip key to start your engine.
Replaces Magneti Marelli ACI600 / ACI601 / ACI602 / ACI603 and ACI604 units.
Or
EFI Technology AC2i / AC3i / AC5i and AC8i CDI units.
For 4 STROKE LEADER ENGINE models only!
Check the photos and part numbers carefully to compare with your original CDI unit as not all bikes are fitted with this system.
Simply plugs straight in to the existing wiring loom. No wires to cut, no soldering, just plug it in and off you go!
You can change your key and barrel and the scooter will still run.
Includes
Replacement CDI Unit
Fits
APRILIA:
- Habana Mojito (2004-2006)
- SportCity 125
- Scarabeo 125
- Atlantic 125
Derbi:
- Boulevard 125
(not suitable for Fuel Injection models)
(Note: Some later models may be fitted with the ACI19i CDI. Please see our other items)
If you are having problems with your Aprilia scooters immobiliser or have a CDI fault (no spark, or won't rev) then this is the simplest solution. Once fitted you will no longer require a key with a built in chip. The scooter will
NOT HAVE AN IMMOBILISER
.
Please check that there are no other issues with your ignition system first, this will only solve your problems if they are CDI related!
This CDI unit replaces all the functions of the original CDI unit, except your scooter will no longer have an Immobilizer. No need for a chip key. You can change your key and barrel and the scooter will still run.
INSTRUCTIONS:
Remove the body work to gain access to your Apilia / Derbi CDI unit. Disconnect the two connectors from the existing CDI and then remove the unit by undoing the two bolts. Plug the replacement CDI into the larger of the two connectors, the smaller connector is no longer required. Mount the new CDI onto the frame using an existing bolt and hole. Re-attach your bodywork and off you go!
WARNING:
Many aftermarket CDI units have the same outer appearance because many manufacturers use the same outer casing. However, the inner workings, most importantly the Spark Timing, can vary by up to 30 degrees between manufacturers and the application that the CDI is intended for. We have imported the CDI unit you are buying here specifically because it has a timing curve suitable for the Piaggio LEADER engine, as fitted to many Aprilia and Derbi scooters.
All CDI units are tested on a working scooter prior to dispatch to ensure they are working.
Please contact us for international postage costs.
INSTRUCTIONS: Remove the body work to gain access to your Apilia / Derbi CDI unit. Disconnect the two connectors from the existing CDI and then remove the unit by undoing the two bolts. Plug the replacement CDI into the larger of the two connectors, the smaller connector is no longer required. Mount the new CDI onto the frame using an existing bolt and hole. Re-attach your bodywork and off you go! WARNING: Many aftermarket CDI units have the same outer appearance because many manufacturers use the same outer casing. However, the inner workings, most importantly the Spark Timing, can vary by up to 30 degrees between manufacturers and the application that the CDI is intended for. We have imported the CDI unit you are buying here specifically because it has a timing curve suitable for the Pia