Immobilizer Bypass CDI for Piaggio X9 Evolution 250cc ECU QUASAR (AC13i ACI605)

Description

CDI Unit to fit Piaggio X9 Evolution 250cc. Made by 'CDI Ignition Technology'.
Also fits the piaggio beverly 250.
This aftermarket CDI replaces the original Piaggio CDI Unit on X9 Evo 250cc (circa 2003 - 2007).
Removes immobilizer, replaces factory CDI. You will no longer require a chip key to start your engine.
Replaces Magneti Marelli ACI605.01 (58055R).
Or
EFI Technology AC13i CDI unit.
NOT SUITABLE FOR FUEL INJECTED MODELS!
Check the photos and part numbers carefully to compare with your original CDI unit as not all bikes are fitted with this immobilizer system.
Simply plugs straight in to the existing wiring loom. No wires to cut, no soldering, just plug it in and off you go!
You can change your key and barrel and the scooter will still run.
Includes
Replacement CDI Unit
Fits
PIAGGIO:
- X9 Evolution 250cc
(QUASAR engine)
- beverly 250
(QUASAR engine)
(not suitable for Fuel Injection models)
If you are having problems with your Piaggio scooters immobiliser or have a CDI fault (no spark, or won't rev) then this is the simplest solution. Once fitted you will no longer require a key with a built in chip. The scooter will
NOT HAVE AN IMMOBILISER
.
Please check that there are no other issues with your ignition system first, this will only solve your problems if they are CDI related!
This CDI unit replaces all the functions of the original CDI unit, except your scooter will no longer have an Immobilizer. No need for a chip key. You can change your key and barrel and the scooter will still run.
INSTRUCTIONS:
Remove the body work to gain access to your Piaggio X9 CDI unit. Disconnect the two connectors from the existing CDI and then remove the unit by undoing the two bolts. Plug the replacement CDI into the larger of the two connectors, the smaller connector is no longer required. Mount the new CDI onto the frame using an existing bolt and hole. Re-attach your bodywork and off you go!
WARNING:
Many aftermarket CDI units have the same outer appearance because many manufacturers use the same outer casing. However, the inner workings, most importantly the Spark Timing, can vary by up to 30 degrees between manufacturers and the application that the CDI is intended for. We have imported the CDI unit you are buying here specifically because it has a timing curve suitable for the Piaggio Quasar 250cc engine, as fitted to many Piaggio scooters.
All CDI units are tested on a working scooter prior to dispatch to ensure they are working.
Please contact us for international postage costs.
INSTRUCTIONS: Remove the body work to gain access to your Piaggio X9 CDI unit. Disconnect the two connectors from the existing CDI and then remove the unit by undoing the two bolts. Plug the replacement CDI into the larger of the two connectors, the smaller connector is no longer required. Mount the new CDI onto the frame using an existing bolt and hole. Re-attach your bodywork and off you go! WARNING: Many aftermarket CDI units have the same outer appearance because many manufacturers use the same outer casing. However, the inner workings, most importantly the Spark Timing, can vary by up to 30 degrees between manufacturers and the application that the CDI is intended for. We have imported the CDI unit you are buying here specifically because it has a timing curve suitable for the Piaggio